The ventilation system model will determine the range: ECO, BASIC, TIMER and PROG
There are models adapted to each need.
The system is fixed to the body of the dryer with 4 screws, it is very simple to dismantle it to clean it or to change the model.
The wire which allows the electrical supply of the device plugs into an IEC plug (PC type). (50 cm wire supplied by default. Different lengths and Y cable available as an option)
KORALP exclusive
K-STOKDRY-A
Boot-dryer (2 to 6 pairs)
The reference in wall-mounted boot drying. The K-STOCKDRY condenses a maximum of technology in a minimum of space: timer, electronic controls, a fully modular system (boots, gloves, helmets), space-saving design, and outstanding ruggedness.
OPTIMIZED SPACE
The different models offer the possibility to choose the one the most adapted to your area, in a reduced space.
Easy use and maintenance
- Ventilation in the upper part to secure the electrical parts (dust and humidity) and optimize the drying space (1 extra pair of shoes).
- Integrated wall fixing system.
- Possibility to change the boots drying tubes by glove / helmet supports.
- Warm air ventilation system to guarantee rapid drying of the elements (boots, gloves ...).
Several models for ventilation
The ventilation system
IEC plug - Wire of all sizes - Available for all types of plugs: Switzerland, UK, AUS, etc.
Fuse holder and spare fuse
General switch to turn the device off when off-season
280 m3/h ventilation turbine. Quality drying guaranteed. Proven robustness
Wire resistance for an optimal temperature exchange
Integrated temperature limiter: stops in case of overheated
Integrated timer (2 h - 3 h - ~)
Electronic temperature sensor for an immediate control of the drying temperature. Depending on the local ambient temperature, an optimal functioning of the heating resistance is guaranteed.
Model with a timer
Electronic timer management: configurable duration 2 h, 3 h or permanent
Particularly suitable for rental housing: press start button, runs for 2 hours and stops automatically
INTEGRATED PROGRAMMER MODEL
- Possibility to program 4 operating time periods specifying the operating days
- Possibility of dissociating the operations in ambient air or hot air mode to limit energy consumption
LE FONCTIONNEMENT
The way it works
1 - Ventilation unit on the upper part of the device to protect all electrical elements from dust and humidity. Durability and security increased.
2 - 4 cm depth body with tool less removable tubes = space saving
3 - Customization of drying locations: 27 cm tubes for ski boots, boots, sneakers 31 cm tubes for rubber boots, gloves or helmets support
4 - Integrated and discreet wall mounting system
5 - Spring-loaded caps on each tube to concentrate ventilation in the only occupied spaces
